Skip to content

Pressure where chips are made.

AreaStawa high-pressure coolant systems for CNC machine tools.

We deliver filtered coolant at the right pressure straight into the cutting zone — with control over outlets, pressure levels and M-code operation. We select the unit for your machine and process.

Configure a unit Send machine details We respond based on your machine and process data.
HPF Flex 70 — 10–70 bar · up to 65 l/min · 5 µm filtration HPF Visco 120 — 30–120 bar · 22 l/min · cutting oil M-code control from the machine program

Two HPF units for different processes

HPF Flex 70 and HPF Visco 120 differ in working medium, pressure range and process type. The choice depends on your machine, coolant and operation.

AreaStawa HPF Flex 70 unit

HPF Flex 70

Versatile unit for water-miscible coolants and emulsions. Range 10–70 bar, flow up to 65 l/min, 5 µm filtration, 1 to 3 high-pressure outlets, M-code control.

10–70 bar · up to 65 l/min · 5 µm filtration · 1–3 outlets View product
AreaStawa HPF Visco 120 unit

HPF Visco 120

Oil unit for precision turning and Swiss-type lathes. Range 30–120 bar, flow 22 l/min, medium: cutting oil, machine control and pressure-level selection.

30–120 bar · 22 l/min · cutting oil View product
Compare the units See the parameter comparison and selection criteria.

Filtered coolant at the right pressure

The unit filters the coolant, delivers it at the selected pressure and directs it straight to the cutting zone.

  1. Filtration protects nozzles and channels
  2. Pressure and flow match the operation
  3. The jet reaches the cutting zone directly
  4. M-codes control pressure and outlets

Better chip and cooling control

The directed jet supports chip breaking and evacuation while keeping the tool consistently cooled.

  1. Chip control and breaking
  2. Chip evacuation from the cutting zone
  3. Improved tool cooling
  4. Stiffens small-diameter tools

Pressure and outlets controlled from the machine program

The unit works with the machine's NC program. M-codes call pressure levels and outlets at the right moments in the cycle — with no manual operator input.

  1. M-code control from the machine program
  2. Pressure-level selection depending on the operation
  3. Control of high-pressure outlets (HPF Flex 70: 1 to 3 outlets)
  4. Works with machine controls (incl. Fanuc, Mitsubishi, Siemens)
Ask about integration Provide the machine model and available M-codes.

We'll select a unit for your machine and process

Send the machine, coolant and operation data. We'll use them to select the right HPC unit configuration.

  • Machine tool manufacturer and model
  • Coolant type (water-miscible / emulsion / oil)
  • Required pressure and flow
  • Tools and channel diameters
  • Description of the chip problem
Send machine details

Email biuro@areastawa.com — we'll reply with a selection proposal.

Chip problem?

Send your machine and process data — we'll select an HPC unit for your machine. The more detail, the more accurate the proposal.

Send machine details Email us

Describe the machine, coolant and problem — we'll reply with a concrete proposal.