Skip to content

HPC Systems

High-pressure coolant systems for CNC machine tools

AreaStawa supplies HPC systems that deliver filtered coolant at controlled pressure straight into the cutting zone. The range includes two HPF units: one for water-miscible coolants and one for cutting oil.

Compare the units Configure a unit

What a high-pressure coolant system is

An HPC system filters coolant and delivers it at high pressure and controlled flow to the cutting zone. Unlike standard low-pressure flooding, HPC lets you aim an energetic, clean jet exactly where chips and heat are generated, and control it from the machine program.

When standard cooling may fall short

Flooding the zone with a large volume of coolant doesn't always reach where it's actually needed. In deep drilling, difficult materials and long-chip operations, plain flooding is often too weak to break and evacuate the chip.

  • Long, tangled chips wrap around the tool or the part
  • Coolant doesn't reach the bottom of the hole or the cutting zone
  • Tool nozzles and channels clog with chips or contamination
  • The process needs frequent stops to clear chips
  • You need repeatable conditions in unattended operation

AreaStawa units

Two HPF units for different processes

HPF Flex 70 and HPF Visco 120 differ in working medium, pressure range and process type. The choice depends on your machine, coolant and operation.

HPF Flex 70

HPF Flex 70

Versatile unit for water-miscible coolants and emulsions. Range 10-70 bar, flow up to 65 l/min, 5 µm filtration, 1 to 3 high-pressure outlets, M-code control. For CNC machining that needs stable cooling and chip evacuation.

  • Pressure: 10-70 bar
  • Flow: up to 65 l/min
  • Medium: Water-miscible coolants / emulsions
  • Filtration: 5 µm
  • Control: M-codes from the machine program
  • Application: CNC machining, drilling, chip evacuation
View product
HPF Visco 120

HPF Visco 120

Oil unit for precision turning and Swiss-type lathes. Range 30-120 bar, flow 22 l/min, medium: cutting oil, machine control and pressure-level selection. For processes needing high pressure in a limited working area.

  • Pressure: 30-120 bar
  • Flow: 22 l/min
  • Medium: Cutting oil
  • Control: Controlled from the machine
  • Application: Precision turning, Swiss-type lathes
View product
Compare the units See the parameter comparison and selection criteria.

HPF Flex 70 or HPF Visco 120?

Both units follow the same principle, filtered coolant at the right pressure in the cutting zone, but they target different processes and media.

Feature HPF Flex 70 HPF Visco 120
Pressure range 10-70 bar 30-120 bar
Maximum flow up to 65 l/min 22 l/min
Working medium water-miscible coolants, emulsions cutting oil
Typical use CNC machining, drilling, chip evacuation precision turning, Swiss-type lathes
Control M-codes, pressure levels/profiles machine control, pressure levels
HP outlets 1 to 3 Selected for the configuration
Filtration 5 µm matched to the process

Selection criteria

How to choose

  • You run water-miscible coolant or emulsion and need outlet flexibility → HPF Flex 70
  • You run precision turning or a Swiss-type lathe on oil → HPF Visco 120
  • You need very high pressure in a limited working area → HPF Visco 120
  • You want to control 1 to 3 high-pressure outlets → HPF Flex 70

Unit selection

Not sure which unit to choose?

Send us the machine, coolant and operation data. We will use them to select a unit and configuration for the process.

Configure a unit Send machine details

We will reply with the recommended model and configuration.